I. The characteristics of machine tools:
This machine adopts a digital keyboard for free lifting, and each group of sanding frames can be raised and lowered electrically; each group of sanding frames can manually adjust the rotation speed; the conveyor belt table can be raised and lowered freely from 0 to 100 mm; each group of sanding frames vibrates left and right, and the vibration amplitude can be adjusted in three stages, and the vibration travel uses linear guide rail sliding, not the traditional cylindrical slide block, with higher precision; each group of sanding frames are removable, convenient for changing sandpaper, with 12 small brush plates on the first, second, and third groups. It can basically achieve no blind spots, each brush plate is fixed with a quick connector, can be taken down by hand, very convenient to change the sand belt; the fourth group transmission uses a synchronous aluminum belt wheel transmission, all connecting motors are selected with worm gear reducers for sanding, and the fourth, fifth, and sixth groups of brush rolls are driven in a direct connection, which makes the whole machine more synchronous.

II. Machine structure: six axes in total
First axis, second axis, third axis, brush plate
Fourth axis, fifth axis, sixth axis, brush roller

III. Function Overview
1. Electric lifting of the conveyor belt 2. Separate electric lifting of each machine group 3. Three adjustable vibration modes to the left and right 4. Variable frequency speed of the sand frame 5. Linear guide rail vibration 6. Large digital keyboard table lifting 7. The brush plate consists of 12 small plates with a diameter of 120mm per group 8. The brush roller is 300mm in diameter 9. The brush plate uses quick connectors 10. The brush roller can be pulled out 11. The brush plate can be pulled out 12. Aluminum profile synchronous wheel drive
13. The motors are all worm gear aluminum motors. 14. The conveyor belt reducer is a 4kw high-power motor. 15. The frequency converter is a joint venture brand/well-known domestic brand.

Machine parameters:
1.Brush roller/brush plate motor  1.5KWx6 units worm gear motor

2. Brush roller/brush plate speed: frequency conversion adjustable
3. Deceleration motor 4kw.
4. Elevation motor 0.55kw
5. Conveyor bed speed 4-20m/s can be manually adjusted
6. The shortest grinding length is 450mm
7. Sanding thickness 2.5mm-100mm
8. Air pressure requirement 0.6mpa
9. Swing motor 0.25kwX6 units
10. Elevator motor 40Wx6 220v gear motor
11. Machine dimensions (length x width x height) 5200mm x 1600mm x 1950mm
12. Weight                   4000kg